Walbro 525LPH E85 HELLCAT High Performance In-Tank Fuel Pump

$199.99

Walbro 525LPH E85 HELLCAT High Performance In-Tank Fuel Pump The New 525LPH pump flows 470LPH @ 50psi base pressure.The 525LPH (470LPH at high pressure) HELLCAT Pump is an all new design featuring a dual channel...

Quantity:

- +

Ask a Question

FAQ

Guaranteed safe checkout:

Orders ship within 5 business days except for custom order line kits which can take 5-7 days.

This item ships free to the US

Walbro 525LPH E85 HELLCAT High Performance In-Tank Fuel Pump

The New 525LPH pump flows 470LPH @ 50psi base pressure.

The 525LPH (470LPH at high pressure) HELLCAT Pump is an all new design featuring a dual channel turbine as opposed to the single channel of the past. This is to maximize efficiency at the higher pressures and temperatures that many modern high power turbo cars will see. This pump is designed for the guys running in the 70-100psi fuel pressure range consistently, and will greatly reduce pump fatigue improving the lifespan of the pump.

You will see this pump called both the 470, and the 525 Hellcat. This is due to the fact that the pump does flow 525lph, but at a very low fuel line pressure that will honestly never be seen in a forced induction setup so as its shown here as the 470lph due to the fact that it actually flows 470lph @ 50psi line pressure, making the comparisons against other fuel pumps more fair.

The 470lph/525 (F90000285) fuel pump will be for those looking to push their car just a little bit farther without having to jump to a twin pump design. 700+HP will be doable on this pump with E85, 800+hp on pump gas, and it will thrive in the higher pressure environments of modern high boost turbo applications.

Universal E85 Installation Kit (400-1168) is available
(Kit Contains: 2 wire Packard plug to plug into fuel pump plug, Fuel Filter, Butt Connectors (x2), Hose Clamps (x2), Fuel Line, Precautionary Statement Sheet)

IMPORTANT INFORMATION ABOUT VOLTAGE AND AMPERAGE SUPPLY FOR THIS CLASS OF VERY HIGH VOLUME FUEL PUMPS

Today's higher output in-tank fuel pumps deliver a higher volume of fuel for today's extremely higher horsepower applications. To enable this higher volume output these new fuel pumps capable of 400-500LPH require a higher voltage and amperage than the lower volume pumps like the Walbro 255LPH HP 550AWHP Fuel Pump which only requires our Ninja Performance 30 Amp Fuel Pump Hotwire Kit.

This fuel pump will perform at its maximum if supplied with the voltage and current it needs. The Ninja Performance 30 Amp Hotwire Kit will power this high volume fuel pump but this pump will draw too much current and eventually overheat the relay and relay socket and the smaller gauge wires that are sufficient for the lower volume fuel pumps will not allow this higher volume pump to run at its full potential.
As with any electric motor, running a fuel pump and demanding high output from it while using a power supply setup that cannot supply the required voltage or amperage shortens the life of the fuel pump. It also causes the fuel pump to heat up faster and to higher temperatures than if supplied with proper voltage and amperage. This heat is transferred to the fuel running thru the pump. Adding to this fuel heating issue, the higher volume fuel pumps cycle fuel from tank to fuel rails and back to tank faster than lower volume pumps. Return systems like the Mitsubishi 3000GT/Dodge Stealth return a large portion of fuel pumped to the fuel rails, via the fuel pressure regulator, looping fuel in this circuit thru a hot pump over and over. Heating up the fuel. Hot fuel increases the temperature of the air/fuel charge, increasing the risk of decreased power/performance and engine damaging detonation.

For this higher volume fuel pump it is HIGHLY RECOMMENDED to use our tested and proven Ninja Performance 50 Amp Fuel Pump Hotwire Kit.

This Fuel Pump WILL need a fuel pump hotwire kit. The OEM fuel pump power supply circuit falls short even powering the OEM pump. Choose below which Hotwire Kit you would like to add to this fuel pump purchase.
Because of the high quality and overkill specifications of the parts we use in building our hotwire kits, and the time spent pre assembling the kits, there is a high final cost incurred making our hotwire kits. Wanting our customers to get all they can out of their new pumps, we offer them at little to no profit to encourage our customers to use the proper power supply for their fuel pump. You can purchase our Ninja Performance Fuel Pump Hotwire Kits with confidence knowing you are getting the best quality Fuel Pump Hotwire kit at a price lower than you could build yourself.

All orders are tracked via USPS and delivered to the address on file. Any orders that are non-deliverable will be returned to Ninja Performance. Any delivery that requires signature confirmation must provide a verified address.

Orders ship within 5 business days except for custom order line/hose kits which can take 5-7 days. Shipping via USPS (tracked) unless otherwise requested. Any shipment that requires signature confirmation must provide a verified address.

All refunds and exchanges must be approved prior to return. All fees involved in payment/transaction processing are non-refundable. Any additional shipping charges are non-refundable.

FREE US DELIVERY

For US customers (including Alaska and Hawaii).

Returns

Returns are only accepted with prior approval.

Secure payment

We accept Visa, American Express, Paypal, Venmo, Mastercard, CashApp and Discover

Support available