Mitsubishi 3000GT/Stealth Billet Aluminum Transfer Case Breathers

$40.99
Mitsubishi 3000GT/Stealth Billet Aluminum Transfer Case Breathers During high speed driving for prolonged periods of time the oil in the transfer case has tendency to foam and leak out with the air through the stock...
Quantity:
- +
Guaranteed safe checkout:
American Express
Apple Pay
Diners Club
Discover
Meta Pay
Google Pay
Mastercard
PayPal
Shop Pay
Venmo
Visa
Orders ship within 5 business days except for custom order line kits which can take 5-7 days.
This item ships free to the US

Mitsubishi 3000GT/Stealth Billet Aluminum Transfer Case Breathers

During high speed driving for prolonged periods of time the oil in the transfer case has tendency to foam and leak out with the air through the stock rubber breeder. Given the limited amount of oil in the transfer case to start with this can cause the oil level to become critically low over time. 
With this billet aluminum breather you can run a hose to a small reservoir in the engine bay instead which allows the oil to separate from the air and run back in to the TC again preventing less of oil. It also allows you to top of the TC directly from the engine bay.

Recommended reservoir: https://www.amazon.com/Chanoc-Plastic-Universal-Reservoir-Scooter/dp/B07LBW9M5K

Installation instructions:
Clean the area around the stock rubber vent thoroughly and then remove it by pulling it upwards. Clean the area around hole itself now that the stock rubber breather has been removed, be careful not to push any dirt into the hole. Connect a hose to the short side of the breather as this is usually easier to do before the breather is installed in the TC. Put a thin layer of RTV on the highlighted part of the breather and then push it into the breather hole of the TC. Let the RTV cure before driving the car.

These billet breathers are made by Robert Oloffson, a fellow 3S enthusiast and small business owner.  They have been tested and proven to be reliable and a worthwhile upgrade to the traditional, rubber TC case breather.

All orders are tracked via USPS and delivered to the address on file. Any orders that are non-deliverable will be returned to Ninja Performance. Any delivery that requires signature confirmation must provide a verified address.

Orders ship within 5 business days except for custom order line/hose kits which can take 5-7 days. Shipping via USPS (tracked) unless otherwise requested. Any shipment that requires signature confirmation must provide a verified address.

  • All refunds and exchanges must be approved prior to return. All fees involved in payment/transaction processing are non-refundable. Any additional shipping charges are non-refundable.

icon_policy
FREE US DELIVERY

For US customers (including Alaska and Hawaii).

icon_policy
Returns

Returns are only accepted with prior approval.

icon_policy
Secure payment

We accept Visa, American Express, Paypal, Venmo, Mastercard, CashApp and Discover

icon_policy
Support available

Contact us via email for any questions regarding your products or builds.

Related product

YOU MIGHT ALSO LIKE

RECENTLY VIEWED PRODUCTS